131 found, showing page 3 of 9
SIMPSON DECK POST CONNECTOR
The DTT2Z is a safe, cost-effective way to attach deck-railing posts to the deck framing for stronger, safer railings. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations. The DTT2Z is also ideal for guardrail-post connections and lateral-load connections between the deck and house.
- Suitable for lighter-duty hold own applications on single or double 2x posts
- Installs easily with Strong-Drive SDS screws (included)
- Made from 14 gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
- Install with SDS 1/4 in. x 2-1/2 in. screws (included)
View Details
Call for Price
2 X 4 FENCE BRACKET Z-MAX
- 20 Gauge
- Holes are sized for 8d x 1-1/2", 8d commons or #6 wood screws
- Z-Max:Hot Dip Galvanized(G185) 1.85oz of zinc per sq-ft surface area per ASTM A653 total both sides
View Details
Call for Price
HI HURRICANE TIE Z MAX
Simpson Strong-Tie hurricane ties are designed to resist high winds and seismic forces by positively connecting trusses/rafters to the top of wall of the structure. These ties connect both solid-sawn and engineered lumber across a wide range of applications. Some hurricane tie models are available with additional corrosion resistance for exterior and treated-wood applications.
- Great for connecting 2x deck joists on top of a perpendicular beam
- Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
- Use also for a variety of connections where one member crosses another
- Made from 18-Gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
- Install with 8d common nails or #9 x 1-1/2 in. Strong-Drive SD screws
View Details
Call for Price
H2.5A HURRICAN CLIP Z-MAX
Hurricane ties provide a positive connection between truss/rafter and the wall of the structure to resist wind and seismic forces.
- 18 Gauge
- Use with 8d Fasteners
- Z-Max:Hot Dip Galvanized(G185) 1.85oz of zinc per sq-ft surface area per ASTM A653 total both sides
View Details
Call for Price
RAFTER TIE PLATE
Simpson Strong-Tie Hurricane Tie - Provides resistance to uplift and lateral forces. Designed to help counter the effect of high wind and seismic events on a structure. Used also for general tie purposes, strongback attachments, and as an all-purpose tie where 1 member crosses another. Install in pairs to connect 2x rafter to top plate. Some sizes available with ZMAX coating.
- Material: Galvanized Steel
- Gauge: 18 ga
- Finish: Galvanized
- Carton Qty: 100/Carton
- Fastners to Rafters: 5-8d
- Fasteners to Plates: 5-8d
- Fasteners to Studs: 50 left, 50 right
View Details
Call for Price
H3 RAFTER TIE
Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field skewable and slopeable options. The Hurricane Tie series features various configurations of wind and seismic ties for trusses and rafters.
- Designed to provide a connection between trusses/rafters and the top plate of the wall to resist high-wind/seismic forces
- Made from 18 gauge steel
- Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
- Galvanized for extra corrosion resistance
- Install with 8d common nails
View Details
Call for Price
H4 RAFTER TIE
Simpson Strong-Tie hurricane ties are designed to resist high winds and seismic forces by positively connecting trusses/rafters to the top of wall of the structure. These ties connect both solid-sawn and engineered lumber across a wide range of applications. Some hurricane tie models are available with additional corrosion resistance for exterior and treated-wood applications.
- Great for connecting 2x deck joists on top of a perpendicular beam
- Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
- Use also for a variety of connections where one member crosses another
- Made from 20-Gauge steel
- Galvanized for extra corrosion resistance
- Install with 8d common nails or #9 x 1-1/2 in. Strong-Drive SD screws
View Details
Call for Price
BAND JOIST HOLDOWN BRACKET BOLTD
The HD3B is light-duty holdown designed for use in shearwalls and braced-wall panels, as well as other lateral applications. Simpson Strong-Tie offers a wide range of bolted holdowns offering low-deflection performance for a range of load requirements. All of these holdowns have been tested in accordance with ICC-ES's AC 155 acceptance criteria and are approved for use in vertical and horizontal applications.
- 12 Gauge
- Use with 5/8" Anchor and (2) 5/8" Stud Bolts
- 2-1/2"W x 8-5/8"H
- Zinc galvanized finish containing 0.90oz of zinc per square foot of surface area (total both sides)
View Details
Call for Price
1-3/4X11-7/8 SINGLE FACE MOUNT
The Hurricane Tie series features various configurations of wind and seismic ties for trusses and rafters. The TSP stud plate tie has now been tested in the top-plate-to-rafter connection. The H2A features an improved design and higher uplift loads to replace the H2. The H10A has a similar design as the H10 but offers higher uplift capacity. The H10S provides a high capacity connection from truss/rafter to stud. The H2.5T's truncated design was developed to accommodate trusses with 2 by 4 bottom chords. The easy to install, five nail pattern is stronger and gets better uplift loads than our popular H2.5 hurricane tie. H1, H10, H10S, H10-2, H11Z and H14 have also been rated for download to provide additional bearing capacity between the truss and wall.
- HU/HUC-Most models have triangle and round holes
- Joist Hanger
- LVL Hanger Hurricane Tie
View Details
Call for Price
FACE MOUNT HANGER SKR 30 RIGHT 2
FACE MOUNT HANGER SKR 30 RIGHT 2
View Details
Call for Price
FACE MOUNT JOIST HANGER
FACE MOUNT JOIST HANGER
View Details
Call for Price
FACE MOUNT HANGER SKR 30 RIGHT
FACE MOUNT HANGER SKR 30 RIGHT
View Details
Call for Price
FACE MOUNT JOIST HANGER
FACE MOUNT JOIST HANGER
View Details
Call for Price
3-1/2X11-7/8 DOUBLE FACE MOUNT
Simpson Strong-Tie connectors make projects easier to build while making them stronger and safer. They are engineered and tested to perform and are manufactured to the highest quality standards. Whether working on a home project or building a structure to comply with building codes, go with the choice of engineers and contractors, go with genuine Simpson Strong-Tie connectors. These heavy-duty face mount joist hangers are designed for schools and other structures requiring additional strength, longevity and safety factors.
- Designed for schools and other structures
- Smooth liens make it attractive
- Can be installed using round holes only
- Galvanized steel
- "U" design allows for flexibility of placement on the header
- Joist size: 4x12
- Made from 14 gauge steel
View Details
Call for Price
